Davies Craig 8050 EWP115 Remote Electric Water Pump Kit Aluminum

$399.90
In stock
SKU
DVC8050
The Davies Craig EWP115 Electric Water Pump and Electric Pump/Fan Digital Controller Combo (Part Number 8050) – is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump and engine
The Davies Craig EWP115 Electric Water Pump and Electric Pump/Fan Digital Controller Combo (Part Number 8050) – is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat. The revolutionary Davies, Craig EWP115 Electric Water Pump is now available in light weight aluminium! Designed with the high-performance pro, sprint, tarmac, circuit and drag racer in mind this rugged alloy electric water pump has 1” NPT internal threads at inlet and outlet for neat, tight, dash fitting applications. This essential performance accessory increases your vehicle’s engine power, coolant temperature control and helps eliminate engine heat soak.  The EWP115 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to seven litres (429 cubic inches). The revolutionary, Australian-designed EWP115 is made from aluminum and incorporates a ceramic faced impellor seal for long-life durability. The EWP115 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP can provide up to 10kW (14HP) of extra power and increased torque. The EWP and Fan Digital Controller will manage both the EWP and Thermatic fan operations. The Digital Controller will vary the speed of the EWP in response to the engine’s coolant temperature. Five temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for two minutes (or to 5°C/9°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP115 Digital Controller Combo is supplied in a do-ityourself kit for fitment to your vehicle’s engine, including an easyto- follow DIY instruction booklet. Technical Specifications for Pump: Dimensions: Height: 84mm (3.31 inches) Width: 128mm (5.04 inches) Inlet Opening: 38mm (1.50 inches) Pump weight: 1200 grams (2.65 lb) Operating voltage: 3V DC to 15V DC Maximum current: 10A Flow rate (max): 115 L/min (1822 US gal/hr) @ 13V DC Operating temperature: -40° to 130°C (-40° to 266°F) Pump design: Clockwise centrifugal Motor life: 3,000 hours continuous at 80°C (176°F) and 12V DC; 7,000 hours with an EWP/Fan Digital Controller (included) Pump material: aluminum Burst pressure: 500 kPa (72.5 psi) Seal: Ceramic face seal Fits hose sizes: 38mm to 51mm (1½” to 2”) Internal thread: inlet 1" NPT, outlet 1" NPT The EWP® is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’   Technical Specifications for Pump / Fan Controller: Dimensions Length: 101mm (4 inches) Width: 95mm (3.74 inches) Depth: 35mm (1.38 inches) Weight 90 grams (3.2 oz) Input voltage: 12V DC to 15V DC Output voltage: 5V to 15V Maximum current: 12A Operating temperatures: -20° to 60°C (-5° to 140°F) Targeted (set) temperatures: 75°C, 80°C, 85°C, 90°C and 95°C (167°, 176°, 185°, 194° and 203°F) Fan cut-in temperature: 3°C (5.4°F) above the targeted (set) temperature Controller type: PCB with microprocessor Sensor type: Thermister in housing Time-out: 2 minutes maximum or set -5°C (23°F) Indicator LEDs: Temperature, power, pump, test, fan   Kit Contents: EWP115 Aluminum Pump, Digital Controller, instructions, wiring harness, In-line adapter, sleeve rubber adapters (4), hose clamps (4), thermal sensor, led with pigtail  
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
4023 Ball Ground Highway Canton, GA 30114 - Questions? Phone 404-310-8211 Copyright © PartsForSpeed.com Canton, Georgia