Daytona Sensors 114001 WEGO IV Wideband AFR Tuning Gauge

Daytona Sensors 114001 WEGO IV Wideband Oxygen Sensor System

The Daytona Sensors 114001 WEGO IV unit is one of the newest members of the Daytona Sensors WEGO family. They use the same WEGO Log data logging software and have the same features and capabilities as the WEGO III except that WEGO IV units are not encapsulated and are intended for use in a underdash or dyno lab environment. An industrial grade clamping terminal block on the rear panel allows easy and reliable hookup without soldering or crimping.  The face of the WEGO unit is a little over 2 1/16" wide, 7/8" tall, and it is 3 1/4" deep, 3 1/2" with the wiring connectors.

The WEGO IV Wide-band Exhaust Gas Oxygen Sensor System includes the WEGO IV unit, Bosch LSU 4.2 oxygen sensor, 96” sensor extension cable, 18 x 1.5 mm weld nut for exhaust pipe, USB cable, and software on CDROM.

The WEGO IV features:

• A complete air/fuel ratio metering system with built-in data logging
• Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure
• Can be used for on-road or dyno testing
• Suitable for underdash or lab use in automotive, motorcycle, and other small engine applications
• Highly accurate with less than ±0.10 AFR error over 10.3-19.5 AFR range
• Easy free-air calibration for sensor aging effects
• 0-5V analog AFR output for interface to dyno instrumentation
• Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions
• Wide supply voltage range from 11-16V allows operation from battery on small engines or race vehicles without an alternator
• Current draw is approximately 1 amp

Included in the box:

• WEGO IV unit
• Bosch LSU 4.2 wideband oxygen sensor
• 96" sensor extension cable
• 18 x 1.5 mm weld nut (bung) for exhaust pipe
• USB Cable
• Software on CD