Davies Craig 8060 EWP150 Remote Electric Water Pump Kit Aluminum
Out of stock
The Davies Craig EWP150 Electric Water Pump Kit (Part Number 8060) is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump.
The Davies Craig EWP150 Electric Water Pump Kit (Part Number 8060) is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump. This essential performance accessory increases your vehicle’s engine power, coolant temperature control and helps eliminate engine heat soak. The pump will fit most vehicle makes and models with engines up to seven litres (429 cubic inches). The revolutionary, Australian-designed EWP150 electric pump is made from aluminum and incorporates a ceramic faced impellor seal for long-life durability. The electric pump greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the electric pump can provide up to 10kW (13HP) of extra power and increased torque. Technical Specifications for the pump: Dimensions: Height: 86mm (3.39 inches) Width: 128mm (5.04 inches) Inlet Opening: 38mm (1.50 inches) Pump weight: 1170 grams (2.6 lb) Operating voltage: 3V DC to 15V DC Maximum current: 10A Flow rate (max): 150 L/min (39.63 US gal/min) @ 13V DC Operating temperature: -40° to 130°C (-40° to 266°F) Pump design: Clockwise centrifugal with volute chamber Pump material: aluminum Burst pressure: 500 kPa (72.5 psi) Seal: Ceramic face seal Fits hose sizes: 38mm to 51mm (1½” to 2”) The EWP is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’ Kit Contents: EWP150 Aluminum Pump, instructions, wiring harness, sleeve rubber adapters (2), hose clamps (2), relay
Write Your Own Review