Davies Craig 8975 EWP150 Black Electric Water Pump Kit LCD Pump & Fan Controller

$379.99
Out of stock
SKU
DVC8975

Davies Craig 8975 EWP150 Black Electric Water Pump Kit LCD Pump & Fan Controller

The Davies Craig EWP150 Electric Water Pump and Electric Pump/Fan Digital Controller Combo (Part Number 8975) is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat.

Celebrating 50 years, Davies Craig Pty Ltd is launching a ‘BLACK LABEL’ Limited Edition EWP150 Remote-Mounted Electric Water Pump!

This attractive model is supplied in glorious matt black power-coat and offers all the modern performance, compactness, and style you come to expect with the high-quality engine cooling products offered by Davies Craig.  This is the same kit as the 8970 with black powdercoated pump instead of silver - while supplies last!

This essential performance accessory increases your vehicle’s engine power, coolant temperature control and helps eliminate engine heat soak.  The pump will fit most vehicle makes and models with engines up to seven liters / 429 cubic inches. The revolutionary, Australian-designed EWP150 electric pump is made from aluminum and incorporates a ceramic faced impeller seal for long-life durability.

The electric pump greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the electric pump can provide up to 10kW (13HP) of extra power and increased torque.

The electric pump and Fan Digital Controller will manage both the pump and thermatic fan operations. The Digital Controller will vary the speed of the electric pump in response to the engine’s coolant temperature. Five temperature settings are provided on the Controller for either maximum power or fuel efficiency.

The thermatic Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for two minutes (or to 5°C/9°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.

The EWP150 Digital Controller Combo is supplied in a do-it-yourself kit for fitment to your vehicle’s engine, including an easy to follow instruction booklet.

 Technical Specifications for Pump:

  • Dimensions:
    • Height: 86mm (3.39 inches)
    • Width: 128mm (5.04 inches)
    • Inlet Opening: 38mm (1.50 inches)
    • Pump weight: 1170 grams (2.6 lb)
  • Operating voltage: 3V DC to 15V DC
  • Maximum current: 10A
  • Flow rate (max): 150 L/min (39.63 US gal/min) @ 13V DC
  • Operating temperature: -40° to 130°C (-40° to 266°F)
  • Pump design: Clockwise centrifugal with volute chamber
  • Pump material: aluminum
  • Burst pressure: 500 kPa (72.5 psi)
  • Seal: Ceramic face seal
  • Inlet and outlet size: 38mm (1½”) - fits hose sizes: 38mm to 44mm / 1½” to 1¾” with included sleeve adapters
  • The EWP is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’

The Davies Craig Digital Controller for Electric Water Pump & Fans has two specific functions. This unique Controller will manage the operation of the Electric Water Pump (EWP) by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60°C (140°F) to 100°C (212°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features:

  • Plus 10°C (14°F) set/target temperature
  • Under temp 40°C after 5 mins
  • Temp sensor error
  • Over or under voltage
  • EWP error

Kit Contents: EWP150 Black Aluminum Pump, Digital Controller, instructions, wiring harness, In-line adapter, sleeve rubber adapters (4), hose clamps (4), temperature sensor assembly, led with pigtail, hardware

  • Black & White Numerical Screen
  • Celsius or Fahrenheit display option
  • Warning Alarms:
  • Select any set temp range from 140°F / 60°C to 212°F / 100°C
  • Set / targeted temperature memory
  • Override feature to assist bleeding EWP & fail safe
  • Input voltage display
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
4023 Ball Ground Highway Canton, GA 30114 - Questions? Phone 404-310-8211 Copyright © PartsForSpeed.com Canton, Georgia