Davies Craig 9025 Electric Booster Water Pump 12V Universal 7.13 GPM Intercooler
Davies Craig Electric Booster Water Pump Part Number 9025
Davies Craig Electric Booster Water Pump Part Number 9025
The EBP25 KIT is a brushless 12 volt, high flow, magnetically driven water pump with a flow rate of 27 liters per minute (7.13 gallons per minute). The pump motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many pump applications include:
booster for car heater and LPG systems
solar pump applications
water cooled motorcycle
go-kart engines
turbo air / water intercoolers
household irrigation
The EBP25 Brushless Electric Booster Pump is more compact, more powerful, lightweight and offers:
This unit replaces the EBP25 - Brushed Motor, Parts Numbers 9005 & 9105. Please inquire if you need an adapter harness to go from your 9005 / 9105 / Bosch pump to the connector for this 9025 pump.
- Motor: 12v Brushless
- Operating Voltage: 8 to 20 volt DC
- Rated Current: 2.1 Amps
- Flow rate @ 12v: 27.0 L/min @ 10 kPa
- Head of delivery: 4.5m @ rated voltage
- Environment Temperatures: -40°c to 125°c (-40°F to 257°F)
- Liquid Temperatures: -40°c to 120°c (-40°F to 248°F)
- Pump Design: Recirculating Centrifugal
- Motor Life: 10 years+@ 80°c
- Weight: 650 grams (1.43lb) including mounting bracket
- Body Material: PPS
- Insulation grade: Level H (180°c/356°F)
- Burst Pressure: 250 Kpa (36psi)
- Inlet & Outlet Size: 19mm (¾”)
- IP Rating: IP67
- Warranty: 2 Years, 40,000km or 2000 hours
- Higher flow capacity: 27.0 L/min at 10 kPa
- Higher head pressure than the EBP25 model it supersedes
- Lower current draw
- Mounting bracket
- Reverse polarity protection
- Overvoltage protection
- Automatic dry-running protection – no liquid in pump, pump will enter idle protection within 5 seconds; Auto shut-down after 120 seconds!
