Daytona Sensors 116001 NC-1 Nitrous Controller & Data Logger

Daytona Sensors 116001 NC-1 Nitrous Controller & Data Logger

The Daytona Sensors 116001 NC-1 is a nitrous system controller. The NC-1 and NC-2 units have identical features and capabilities except that the NC-2 can directly drive two nitrous stages with progressive control (modulated flow). The NC-1 requires external relays and is limited to on/off control.

• By independently modulating the fuel and nitrous solenoids, you can control the AFR. This is especially useful for late model fuel injected vehicles.
• Nitrous Controller NC-1 Features:
• Drives two nitrous stages and purge solenoid.
• Each stage is independently programmable based on throttle position, RPM, vehicle speed, time delay, and first gear lockout.
• Output for purge solenoid (requires external relay). Programmable automatic purge when system is armed.
• Flexible RPM input compatible with high voltage coil drive (vehicles with coil packs or distributor ignition), standard 12 volt tach signal, or low level logic drive (newer vehicles with coil-on-plug).
• General purpose input/output (GPIO) terminal. Programmable for use as shift light output, additional stage enable input, or control output for ignition retard.
• In the box: NC-1, data cable, and instructions.
• The most up-to-date version of the NC-1 Nitrous Controller software is available for download from the Daytona Sensors website Tech Center at no charge - feel free to download and test drive the software before you make your purchase.