DIYAutoTune GM Closed Element CLT/Oil Sensor with Pigtail
$29.99
In stock
SKU
DIYCLTIATwPiggy
DIYAutoTune GM Closed Element CLT/Oil Sensor with Pigtail
GM Closed Element Coolant / Oil Temperature Sensor with Pigtail
Suitable for use as a Coolant Temperature Sensor (CLT) on all vehicles. This can be used as an Intake Air Temp Sensor (IAT) on naturally aspirated vehicles if there are severe vibration issues, but normally we would recommend an open element IAT sensor for air temperature use. It can also be used as an oil temperature sensor. These are the proper GM-style sensors for use with the MegaSquirt line of ECUs and include a 6″ wire pig-tail with weatherproof connector.
The threads are 3/8″ NPT pipe thread.
If you need to calibrate your MS for this sensor, here’s the calibration data we use for them for a three point curve.
Temperature | Ohms |
48 degrees F | 7000 |
87 degrees F | 1930 |
146 degrees F | 560 |
Write Your Own Review